Thin humidity probe with built-in electronics, incl. 4 attac...
0636 2135
EAN:
4029547002878
The slim humidity probe measures material moisture via the equilibrium moisture content and can very easily be used in recesses or bore holes thanks to its slim design and remote electronics. The material moisture can also be determined directly in the instrument in combination with the testo 635 temperature and humidity measuring instrument.
Features
-
- Measurement of the material moisture via the equilibrium moisture content
- Slim design (Ø 4 mm) with remote electronics – ideal for tight measuring points
5.340,00 kr.
/ Piece excl. VAT
InStock
6.675,00 kr. Incl. VAT
🟢 In stock
Delivery
Order before 2:00 PM and we will ship the same day if the item is in stock.
Contact us
-
Materials which take in and retain or release water are described as hygroscopic materials. Hygroscopic materials always try to form a moisture equilibrium with the surrounding air. This principle is used to measure the moisture in material by measuring moisture equilibrium.
Ideally, moisture equilibrium is measured in a bore hole in the material. To keep the bore hole as small as possible, a thin 4mm humidity probe is used. It should be protected from dirt by a PTFE cap during measurement. The bore hole is then simply sealed using sealing clay.
Based on the moisture equilibrium measured, testo 635 automatically shows material moisture in % in the display. Material moisture calculation is available for the following materials:
– Concrete
– High-insulation bricks
– Solid bricks
– Hard wood
– Soft wood
– Gas concrete
– Particle board
– Calcium sulphate floating screed
– Cement floating screed
– Lime sand brick
Materials are easy to select from the menu. Using the "Material" user profile, the material can be accessed directly at the touch at a button.
Additional material characteristics can be stored in testo 635-2 using ComSoft.
showProductFields: True
displayGroups.Count: 0
showProductCategories: True - product.ProductCategories.Count: 1
showProductRelated: False - product.RelatedGroups.Count: 0